Product Overview

ST To LC Fiber Cable (ST-LC Duplex Zipcord | G.652D/OM2/OM3/OM4)

Type: ST-LC duplex fiber optic patch cord with aramid yarn strength member and LSZH jacket.

Application: Single-mode or multimode fiber connections between ST bayonet-interface equipment and LC-interface equipment.

Item	Parameter	Item	Parameter
Connector	ST-LC	Construction	Duplex zipcord
Fiber Type	G.652D/OM2/OM3/OM4	outer diameter	2.0×4.0mm
single-mode insertion loss	≤0.2dB	multimode insertion loss	≤0.3dB
single-mode Return Loss	≥50dB	multimode Return Loss	≥30dB
single-mode Interchangeability	≤0.2dB	multimode Interchangeability	≤0.3dB
Strength Material	Aramid yarn	Jacket Material	LSZH
Short-Term Tensile Load	150N	Bend Radius	≥30mm
Temperature Range	Installation 0~+60℃; operation -20~+60℃	Applicable Interface	ST port and LC port

Compatible with ST-LC fiber connection environments used with Cisco, HPE, Huawei, and similar equipment.
Can be used for connections among ST/LC optical transceivers, ODF, fiber patch panels, and terminal equipment.
Interface, polarity, and end-face type can be confirmed according to the project port configuration.

Data Rate: Can be used for 10G / 40G optical transceiver links; confirm based on single-mode / multimode type, connector, and link distance.
Test Standard: Before shipment, insertion loss, return loss, polarity, and end-face cleanliness can be inspected as required.
Fluke Test: Fiber link-loss testing can be performed according to project acceptance requirements.
Attenuation: Measures connector insertion loss and total patch-cord link loss.
Crosstalk: Focuses on polarity, end face, and port mapping to avoid link interruption caused by fiber patching errors.

Fiber Type: Single-mode OS2 or multimode OM3 / OM4 / OM5 can be selected according to project requirements.
Jacket Material: Optional LSZH low-smoke zero-halogen jacket, suitable for cabinet and indoor cabling.
Connector Construction: Can be produced according to UPC / APC end-face, jacket diameter, and color requirements.
Termination Materials: Connector ends can use precision ferrules and dust caps to reduce end-face contamination risk.

Packaging & MOQ

Packaging: Individual bag, label packaging, carton, and pallet packaging are available.
Label Packaging: Length, interface, fiber type, polarity, and port number can be marked.
MOQ: Common interfaces and lengths can be ordered by pack or full carton.
Custom MOQ: Special length, polarity, end face, breakout structure, or OEM packaging orders are confirmed by project quantity; custom projects can be discussed for requirements of RMB 200,000 or above.

Installation: Used for plug-and-play connections among optical transceivers, ODF, fiber patch panels, or terminal equipment.
Pre-terminated: This product is a pre-terminated finished fiber patch cord with connectors factory terminated.
Installation Notes: Confirm connector type, end-face type, cable length, and port direction before installation.
Operation Requirements: Keep dust caps on during handling, clean end faces before connection, and avoid excessive bending or pulling.
Installation Check: After completion, check end faces, polarity, port numbers, and link loss.

In-stock Availability: Common interfaces, polarities, and lengths are usually in stock for replenishment and urgent projects.
Production Lead Time: For items not in stock, production usually takes approximately 10 working days.
Custom Lead Time: For length, interface, fiber type, polarity, end face, or OEM packaging requirements, lead time is confirmed based on order quantity and production schedule.
Shipment Confirmation: Inventory quantity, packaging method, and estimated dispatch time can be confirmed before ordering.

OEM/ODM Capabilities

Supports ST-LC duplex zipcord construction customization
Supports single-mode and multimode fiber options
Customizable length, jacket color, and port labels
Supports A/B end marking, polarity marking, and project numbering
Connector colors and cable printing can be configured according to equipment interface requirements

Applications

ST interface equipment to LC interface equipment connection

Patching for fiber media converters, patch panels, and test equipment

Single-mode or multimode fiber communication links

Our Projects

Internationally certified quality systems support reliable cabling products for network, communication, and security projects.

ISO9001

ISO14001

ISO45001

CCC Certification – AVAVRAVVRRVVP

CCC Certification – BVRVBVR

CCC Certification – RVVRSRVB

What connection requirement does the ST-LC patch cord address?

-

It is used for fiber connection conversion between ST bayonet ports and LC ports.

Are the insertion losses the same for single-mode and multimode versions?

-

Single-mode insertion loss is ≤0.2dB, and multimode insertion loss is ≤0.3dB.

Is the ST interface secure?

-

ST is a bayonet-style connection that locks by inserting and twisting, making it suitable for corresponding ST equipment ports.

What is the jacket material?

-

The jacket is LSZH, suitable for indoor equipment rooms and building cabling.

What is the installation temperature range?

-

Installation Temperature is 0~+60℃, Operating Temperature is -20~+60℃.