Description

Technical Parameters

Product Overview

FC To LC Patch Cord (FC-LC Duplex Zipcord | G.652D/OM2/OM3/OM4)

Type: FC-LC duplex fiber optic patch cord with ceramic ferrules, aramid yarn strength member, and LSZH jacket.

Application: Connections between FC threaded-interface equipment and LC transceivers or distribution systems.

Item	Parameter	Item	Parameter
Connector	FC-LC	Construction	Duplex zipcord
Fiber Type	G.652D/OM2/OM3/OM4	Ferrule	Ceramic ferrule
single-mode insertion loss	≤0.2dB	single-mode Return Loss	≥50dB
multimode Return Loss	≥30dB	Repeatability/Interchangeability	<=0.2dB (single-mode)
outer diameter	2.0×4.0mm	Strength Material	Aramid yarn
Jacket Material	LSZH	Short-Term Tensile Load	150N
Bend Radius	≥30mm	Temperature Range	Installation 0~+60℃; operation -20~+60℃
Length	1-15 m fixed length	Applicable Interface	FC port and LC port

Compatible with FC-LC fiber connection environments used with Cisco, HPE, Huawei, and similar equipment.
Can be used for connections among FC/LC optical transceivers, ODF, fiber patch panels, and terminal equipment.
Interface, polarity, and end-face type can be confirmed according to the project port configuration.

Data Rate: Can be used for 10G / 40G optical transceiver links; confirm based on single-mode / multimode type, connector, and link distance.
Test Standard: Before shipment, insertion loss, return loss, polarity, and end-face cleanliness can be inspected as required.
Fluke Test: Fiber link-loss testing can be performed according to project acceptance requirements.
Attenuation: Measures connector insertion loss and total patch-cord link loss.
Crosstalk: Focuses on polarity, end face, and port mapping to avoid link interruption caused by fiber patching errors.

Fiber Type: Single-mode OS2 or multimode OM3 / OM4 / OM5 can be selected according to project requirements.
Jacket Material: Optional LSZH low-smoke zero-halogen jacket, suitable for cabinet and indoor cabling.
Connector Construction: Can be produced according to UPC / APC end-face, jacket diameter, and color requirements.
Termination Materials: Connector ends can use precision ferrules and dust caps to reduce end-face contamination risk.

Packaging & MOQ

Packaging: Individual bag, label packaging, carton, and pallet packaging are available.
Label Packaging: Length, interface, fiber type, polarity, and port number can be marked.
MOQ: Common interfaces and lengths can be ordered by pack or full carton.
Custom MOQ: Special length, polarity, end face, breakout structure, or OEM packaging orders are confirmed by project quantity; custom projects can be discussed for requirements of RMB 200,000 or above.

Installation: Used for plug-and-play connections among optical transceivers, ODF, fiber patch panels, or terminal equipment.
Pre-terminated: This product is a pre-terminated finished fiber patch cord with connectors factory terminated.
Installation Notes: Confirm connector type, end-face type, cable length, and port direction before installation.
Operation Requirements: Keep dust caps on during handling, clean end faces before connection, and avoid excessive bending or pulling.
Installation Check: After completion, check end faces, polarity, port numbers, and link loss.

In-stock Availability: Common interfaces, polarities, and lengths are usually in stock for replenishment and urgent projects.
Production Lead Time: For items not in stock, production usually takes approximately 10 working days.
Custom Lead Time: For length, interface, fiber type, polarity, end face, or OEM packaging requirements, lead time is confirmed based on order quantity and production schedule.
Shipment Confirmation: Inventory quantity, packaging method, and estimated dispatch time can be confirmed before ordering.

OEM/ODM Capabilities

Supports FC-LC duplex zipcord construction customization
Supports G.652D, OM2, OM3, and OM4 fiber types
Customizable length, jacket color, labels, and port marking
Supports according to equipment port orientation configuration A/B end marking.
Cable printing and packaging labels can be customized according to project requirements