Product Overview
LC To LC Fiber Jumper (Duplex Zipcord | G.652D/OM2/OM3/OM4)
Type: LC-LC duplex fiber optic patch cord with ceramic ferrules, aramid yarn strength member, and LSZH jacket.
Application: Connections for LC transceivers, ODFs, fiber patch panels, and data communication optical links.
Technical Specifications
|
Item |
Parameter |
Item |
Parameter |
|
Connector |
LC-LC |
Construction |
Duplex zipcord |
|
Fiber Type |
G.652D/OM2/OM3/OM4 |
Ferrule |
Ceramic ferrule |
|
single-mode insertion loss |
≤0.2dB |
single-mode Return Loss |
≥50dB |
|
multimode Return Loss |
≥30dB |
Repeatability/Interchangeability |
<=0.2dB (single-mode) |
|
outer diameter |
2.0×4.0mm |
Strength Material |
Aramid yarn |
|
Jacket Material |
LSZH |
Short-Term Tensile Load |
150N |
|
Bend Radius |
≥30mm |
Temperature Range |
Installation 0~+60℃; operation -20~+60℃ |
|
Length |
1-15 m fixed length |
Applicable Interface |
LC duplex interface |
Compatibility
- Compatible with LC-LC fiber connection environments used with Cisco, HPE, Huawei, and similar equipment.
- Can be used for connections among LC/LC optical transceivers, ODF, fiber patch panels, and terminal equipment.
- Interface, polarity, and end-face type can be confirmed according to the project port configuration.
Performance Parameters
- Data Rate: Can be used for 10G / 40G optical transceiver links; confirm based on single-mode / multimode type, connector, and link distance.
- Test Standard: Before shipment, insertion loss, return loss, polarity, and end-face cleanliness can be inspected as required.
- Fluke Test: Fiber link-loss testing can be performed according to project acceptance requirements.
- Attenuation: Measures connector insertion loss and total patch-cord link loss.
- Crosstalk: Focuses on polarity, end face, and port mapping to avoid link interruption caused by fiber patching errors.
Materials & Construction
- Fiber Type: Single-mode OS2 or multimode OM3 / OM4 / OM5 can be selected according to project requirements.
- Jacket Material: Optional LSZH low-smoke zero-halogen jacket, suitable for cabinet and indoor cabling.
- Connector Construction: Can be produced according to UPC / APC end-face, jacket diameter, and color requirements.
- Termination Materials: Connector ends can use precision ferrules and dust caps to reduce end-face contamination risk.
- Packaging: Individual bag, label packaging, carton, and pallet packaging are available.
- Label Packaging: Length, interface, fiber type, polarity, and port number can be marked.
- MOQ: Common interfaces and lengths can be ordered by pack or full carton.
- Custom MOQ: Special length, polarity, end face, breakout structure, or OEM packaging orders are confirmed by project quantity; custom projects can be discussed for requirements of RMB 200,000 or above.
Installation & Use
- Installation: Used for plug-and-play connections among optical transceivers, ODF, fiber patch panels, or terminal equipment.
- Pre-terminated: This product is a pre-terminated finished fiber patch cord with connectors factory terminated.
- Installation Notes: Confirm connector type, end-face type, cable length, and port direction before installation.
- Operation Requirements: Keep dust caps on during handling, clean end faces before connection, and avoid excessive bending or pulling.
- Installation Check: After completion, check end faces, polarity, port numbers, and link loss.
Lead Time & Supply Capacity
- In-stock Availability: Common interfaces, polarities, and lengths are usually in stock for replenishment and urgent projects.
- Production Lead Time: For items not in stock, production usually takes approximately 10 working days.
- Custom Lead Time: For length, interface, fiber type, polarity, end face, or OEM packaging requirements, lead time is confirmed based on order quantity and production schedule.
- Shipment Confirmation: Inventory quantity, packaging method, and estimated dispatch time can be confirmed before ordering.
- Supports G.652D, OM2, OM3, and OM4 fiber types
- Custom lengths from 1-15m and project-specified lengths are available
- Supports jacket color/polarity marking and port labels.
- LC-LC duplex zipcord construction can be customized according to equipment ports
- Supports packaging labels, project IDs, and cable printing
Applications
- LC optical transceiver to patch panel connection
- Fiber patching in data centers and telecom rooms
- Single-mode and multimode fiber cabling systems
Quality & Certifications
Internationally certified quality systems support reliable cabling products for network, communication, and security projects.
ISO9001
ISO14001
ISO45001
CCC Certification – AVAVRAVVRRVVP
CCC Certification – BVRVBVR
CCC Certification – RVVRSRVB
Frequently Asked Questions
Does the LC-LC patch cord support single-mode and multimode fiber?
-
G.652D single-mode and OM2, OM3, and OM4 multimode fibers are supported.
What is the single-mode insertion loss?
-
G.652D single-mode insertion loss is ≤0.2dB, with return loss ≥50dB.
jacket is LSZH?
-
Yes. Jacket Material is LSZH.
Can different lengths be produced?
-
Yes. Standard fixed lengths of 1-15m are supported, and project-specific lengths can also be produced.
What is the bend-radius requirement?
-
The bend radius should be ≥30mm. Avoid excessive bending during installation and cable management.