Description

Technical Parameters

Product Overview

LC Fiber Pigtail (UPC | 0.9mm | 1 Fiber/12 Fibers)

Type: LC fiber pigtail with UPC polish and 0.9mm standard 12-color coating.

Application: Fiber cable splicing, ODFs, termination boxes, and LC-interface fiber cabling systems.

Compatible with LC fiber splicing and distribution environments used with Cisco, HPE, Huawei, and similar equipment.
Can be used for ODF, fiber patch panels, fiber termination boxes, splice trays, and cable termination.
The LC connector end is used for equipment or adapter connection, while the bare fiber end is used for field splicing.

Data Rate: Can be used for 10G / 40G optical transceiver links; confirm based on single-mode / multimode type, connector, and link distance.
Test Standard: Before shipment, insertion loss, return loss, and end-face quality can be inspected as required.
Fluke Test: After splicing, fiber link-loss testing can be performed according to project acceptance requirements.
Attenuation: Measures connector insertion loss and post-splicing link loss.
Crosstalk: Focuses on fiber numbering, port mapping, and end-face cleanliness to avoid wrong-fiber splicing or port mismatch.

Fiber Type: Single-mode OS2 or multimode OM3 / OM4 / OM5 can be selected according to project requirements.
Jacket Material: Optional LSZH low-smoke zero-halogen jacket, suitable for ODF and indoor distribution.
Connector Construction: The LC end can be produced according to UPC / APC end-face and color requirements.
Bare Fiber End: Used for splicing; the end should be protected and length-marked before shipment.

Packaging & MOQ

Packaging: Individual bag, label packaging, carton, and pallet packaging are available.
Label Packaging: Connector type, length, fiber type, end face, and batch number can be marked.
MOQ: Common interfaces and lengths can be ordered by pack or full carton.
Custom MOQ: Special length, end face, color, or OEM packaging orders are confirmed by project quantity; custom projects can be discussed for requirements of RMB 200,000 or above.

Installation: The connector end plugs into an adapter or device port, while the bare fiber end is used for splicing.
Pre-terminated: The connector end is factory pre-terminated; only the bare fiber splice end needs to be handled on site.
Installation Notes: Protect the bare fiber end before splicing to avoid contamination, bending, and tensile damage.
Fiber Coiling Requirement: After splicing, arrange the fiber along the coiling path while maintaining the bend radius and clear port numbering.
Installation Check: After completion, check end faces, splice points, fiber numbers, and link loss.

In-stock Availability: Common interfaces and lengths are usually in stock for replenishment and urgent projects.
Production Lead Time: For items not in stock, production usually takes approximately 10 working days.
Custom Lead Time: For connector, length, end face, fiber type, or OEM packaging requirements, lead time is confirmed based on order quantity and production schedule.
Shipment Confirmation: Inventory quantity, packaging method, and estimated dispatch time can be confirmed before ordering.