Description

Technical Parameters

Product Overview

Category 3 Patch Panel (110 Type | 100 Pairs | 24-26AWG)

Type: Category 3 voice 110 patch panel, 4-pair/5-pair 110 connecting blocks, Whiteunshielded construction.

Application: voice backbone cabling, PBX port breakout, and telecommunications-room cross-connects.

Item	Parameter	Item	Parameter
Structure Type	110-type patch panel	connection capacity	100 pairs
Shielding Type	Unshielded	Color	White
Connecting Blocks	4-pair/5-pair 110 connecting blocks	Termination Method	110 punch-down termination
Overall Material	ABS plastic	IDC Material	Nickel-plated phosphor bronze
Applicable Wire Gauge	24-26AWG	IDC Termination Cycles	>=200 cycles
Installation Temperature	0~+60℃	Operating Temperature	-20~+60℃
Labeling Method	Replaceable color label paper	Applicable System	Voice backbone cross-connect

Compatible with 19-inch RJ45 cabinet cabling environments used with Cisco, HPE, Huawei, and similar equipment.
Supports T568A / T568B termination standards.
Can connect horizontal cables, patch cords, switches, and cabinet cabling systems.
Recommended for use with Cat3 modules, patch panels, and RJ11 / RJ45 termination components to maintain link-grade consistency.

Data Rate: Supports voice communication and 10Mbps low-speed data transmission.
10G / 40G Assessment: Not intended for 10G / 40G high-speed network projects.
Fluke Test: After termination, the complete link can be Fluke tested.
Attenuation: Confirmed by complete-link test results; port termination quality affects loss.
Crosstalk: Port spacing, IDC termination, and pair untwist length affect crosstalk performance.

Panel Material: Cold-rolled steel or metal panels with surface coating can be used.
Termination Structure: Cat3-grade RJ45 ports and IDC terminals, suitable for terminating corresponding-grade 99.99% pure-copper Ethernet cables.
Label Structure: Port numbers, replaceable label strips, or cable management brackets can be configured.
Matching Cable: Can be used with LSZH jacketed cables for cabinet and indoor project cabling.

Packaging & MOQ

Packaging: Individual carton, foam protection, outer carton, and pallet packaging are available.
Accessory Packaging: Screws, label strips, or cable management accessories can be included in the box.
MOQ: Standard port specifications can be ordered by unit or full carton.
Custom MOQ: Special port count, color, labels, or OEM packaging orders are confirmed by project quantity; custom projects can be discussed for requirements of RMB 200,000 or above.

Installation: Supports 19-inch cabinet or rack mounting.
Pre-terminated: Can be used with pre-terminated modules, patch cords, or project-based kit solutions to reduce on-site termination work.
Termination Standard: Use either T568A or T568B consistently during installation and keep port numbering consistent.
Installation Notes: Horizontal cables entering the patch panel should be fixed and managed to avoid port strain.
Installation Check: After completion, check wiring sequence, continuity, port labels, and link test results.

In-stock Availability: Common port specifications are usually in stock for replenishment and urgent projects.
Production Lead Time: For items not in stock, production usually takes approximately 10 working days.
Custom Lead Time: For port count, category grade, color, label, or OEM packaging requirements, lead time is confirmed based on order quantity and production schedule.
Shipment Confirmation: Inventory quantity, packaging method, and estimated dispatch time can be confirmed before ordering.

OEM/ODM Capabilities

Supports 100-pair 110-type voice patch panel configuration
Supports label paper, port numbering, and color-coding customization
4-pair or 5-pair connecting block options can be selected according to the project
Supports packaging, logo, and project numbering customization
Can be supplied with Category 3 patch cables, voice modules, and cabinets