Product Overview
Fiber Optic Patch Panel (1/2 Ports | 86×86mm | Compatible with LC Duplex/SC Simplex Adapters)
Type: Wall-mounted fiber information faceplate made of ABS, with a 45° angled fiber outlet design.
Application: Fiber terminal interface connections for FTTx, work areas, and telecommunications rooms.
Technical Specifications
|
Item |
Parameter |
Item |
Parameter |
|
Size |
86×86mm |
number of ports |
1 port, 2 ports |
|
Material |
ABS plastic |
Color |
White |
|
Adapter Compatibility |
LC duplex, SC simplex |
Fiber Exit Design |
45° angled design |
|
Port Type |
APC configuration available |
Installation Method |
Standard mounting box |
|
Installation Temperature |
0~+60℃ |
Operating Temperature |
-20~+60℃ |
|
Applicable Location |
FTTx, work areas, telecommunications rooms |
Cable Management |
Supports pigtail/patch cord bend-radius management |
Compatibility
- Compatible with optical transceiver link and fiber distribution environments used with Cisco, HPE, Huawei, and similar equipment.
- Can be used for cabinet fiber distribution, ODF, optical transceiver links, and cable termination.
- Interface options can be confirmed with LC, SC, FC, ST, and other adapters plus pigtail solutions.
- Port numbers, fiber sequence, and polarity can be labeled according to project drawings or cabling specifications.
Performance Parameters
- Data Rate: Can carry 10G / 40G fiber links; actual speed depends on fiber type, adapter configuration, and optical transceiver.
- Test Standard: After installation, insertion loss, return loss, end-face condition, or OTDR link testing can be performed as required.
- Fluke Test: Fiber link-loss testing can be performed according to project acceptance requirements.
- Attenuation: Confirmed according to adapter, pigtail, splice point, and total link loss.
- Crosstalk: Focuses on polarity, fiber sequence, port numbering, and end-face cleanliness to avoid port mismatch.
Materials & Construction
- Fiber Type: Single-mode OS2 or multimode OM3 / OM4 / OM5 adapters, pigtails, or components can be selected according to the configuration.
- Jacket Material: Matching pigtails or pre-terminated cables can be supplied with an optional LSZH low-smoke zero-halogen jacket.
- Box Material: Cold-rolled steel or metal construction with surface coating can be used.
- Configuration Confirmation: Port quantity, interface type, adapter color, splice tray quantity, and labeling method can be confirmed by order.
- Packaging: Individual carton, foam protection, outer carton, and pallet packaging are available.
- Accessory Packaging: Screws, labels, adapters, splice trays, or mounting accessories can be included in the box.
- MOQ: Common configurations can be ordered by unit, piece, or full carton.
- Custom MOQ: Special port, interface, color, capacity, or OEM packaging orders are confirmed by project quantity; custom projects can be discussed for requirements of RMB 200,000 or above.
Installation & Use
- Installation: Supports 19-inch cabinet or rack mounting, suitable for fiber distribution in equipment rooms and ELV / low-voltage rooms.
- Pre-terminated: Adapters, pigtails, or splice trays can be pre-installed, or the product can be configured according to a pre-terminated solution.
- Installation Notes: Confirm cable entry/exit direction, port numbering, fiber coiling space, and maintenance access.
- Construction Protection: Keep connectors and adapters dust-protected, and control the bend radius during fiber coiling.
- Installation Check: After completion, check end faces, labels, fiber coiling condition, and link loss.
Lead Time & Supply Capacity
- In-stock Availability: Common port and interface specifications are usually in stock for replenishment and urgent projects.
- Production Lead Time: For items not in stock, production usually takes approximately 10 working days.
- Custom Lead Time: For port quantity, interface type, configuration solution, or OEM packaging requirements, lead time is confirmed based on order quantity and production schedule.
- Shipment Confirmation: Inventory quantity, packaging method, and estimated dispatch time can be confirmed before ordering.
- Supports 1-port and 2-port fiber faceplate configurations
- Supports LC duplex and SC simplex adapter combinations
- Customizable faceplate color, port labels, and project numbering
- Supports logo, silk-screen printing, and packaging label customization.
- Pigtail, adapter, and faceplate combinations can be supplied according to FTTx project requirements
Applications
- FTTx drop fiber terminal interfaces
- Fiber information outlets in offices, residences, and telecommunications rooms
- Wall installation for LC/SC fiber adapters
Our Projects
Internationally certified quality systems support reliable cabling products for network, communication, and security projects.
ISO9001
ISO14001
ISO45001
CCC Certification – AVAVRAVVRRVVP
CCC Certification – BVRVBVR
CCC Certification – RVVRSRVB
Frequently Asked Questions
Is this a copper faceplate or a fiber faceplate?
-
This is a fiber information faceplate used for installing LC or SC adapters.
What adapters are supported?
-
It supports LC duplex and SC simplex adapters.
What is the purpose of the 45° angled design?
-
It helps control the bend radius of pigtails and patch cords and reduces direct front-facing exposure risk.
What are the dimensions?
-
The size is 86×86mm and is suitable for standard wall installation.
Can it be supplied together with pigtails?
-
Yes. Pigtails, adapters, and faceplates can be supplied as a project-matched set.